How To Avoid Electrical Difficulties, Tips to Keep Your Installation Working Well

How To Avoid Electrical Difficulties, Tips to Keep Your Installation Working Well

A clean home is a happy home, like an old saying would go. At a special time like this, having a well-wired home is essential to reside in comfort and peace. However, there are common signs that many homeowners or renters tend to look over pertaining with their electricity.

For example, Bob and Mary moved into their first home. The house was built in 1975, so some of the wiring is outdated. Bob noticed that in the master bedroom the outlet would not accept three-prong grounded plugs. In the closet, there’s a built in circuit breaker, so if there’s any problems he or Mary can reset the breaker if it trips.

In the living room, Mary has an “octopus outlet”, or an outlet with multiple addons near the kitchen, by the backdoor. Occasionally, when Mary turns on the floor fan, or the living room TV, the lights would dim for a short period of time before adjusting back to normal.

Judging the situation, Bob and Mary are experiencing several electrical difficulties in their home. Frantically, they contacted their local Kansas City electrician for an analysis throughout their home, and see what necessary steps can be taken to help not trip their breaker.

Tip #1: Know the breaker’s amperage

Constant breaker-tripping can be a sign that the circuit’s wiring is damaged. Normally, if the wiring is damaged, then it cannot carry as much current, or energy, and can no longer handle normal loads. To prevent the continuous tripping, use an amp reader to determine how much juice the breaker uses from general appliances.

Another thing to keep in mind is the age of the wires. Over time, the wires will become old and more brittle, which can cause insulation problems and can break. If the breaker isn’t up to date, then contacting the local electrician will be the next step.

Tip #2: Stay up to date with technological upgrades

Everyday technology is advancing. New electrical codes are being generated to create safer homes, and efficient repairs within the home. The wiring system may become hazardous throughout the home, especially if it is outdated. If necessary, having an electrician come out and bring the home up to current with today’s coding will be sufficient and put his or her family at ease.

Tip #3: Limiting additional plug-ins at an outlet

Short and simple, having multiple plug-ins in an outlet can push the electrical flow beyond recommended capacity. The best way to prevent this issue is by having additional circuits with duplex receptacles. Sometimes in older built homes there aren’t many outlets, which can cause a problem with balancing the flow of energy.

Tip #4: Older outlets in older homes may not accept three-prong grounded plugs

If the home is built between 1965 to 1975, generally, this may indicate that the wiring system isn’t grounded properly. This can put the home at a safety risk. In reference to Tip #2, it may be best for an update with the wiring system, as well as additional plug-ins throughout the home.

In addition, if the outlets are warm to the touch, then the wiring may also be aluminum and will need to be checked regularly. There are local electricians that are highly skilled with checking the wiring in the home. In older homes, many wires are made of aluminum wiring. Typically, using copper wiring is more stable in comparison to aluminum wiring due to having smaller conductors and needing to transmit various power loads.

Conclusion

After reaching out to their local Kansas City electrician, Bob and Mary are well informed about their home and what needs to be done to have a happier home. Before buying a home, be sure to factor in the year it was built, as well as any possible electrical problems it may or may not have. It is common to have broken wires due to pests or rodents chewing on them as well. However, every older home isn’t a waste if the maintenance is done properly.

Donald Phillips